{"schemaVersion":"1.0","publisher":"HG-ALSION","language":"en","currency":"UAH","website":"https://www.hg-alsion.com","selectionGuide":"https://www.hg-alsion.com/en/finder","notes":"Only public products. Specifications are stated requirements, not formal approvals unless explicitly listed. Exact vehicle fit requires verified manufacturer requirements.","products":[{"id":"c4b0eb2f-e50b-da3a-76ae-63c6e1ac55c4","sku":"HG/AL 1101","name":"ALSION for petrol & LPG engines","category":"engine","language":"en","url":"https://www.hg-alsion.com/en/additives/engine-petrol","description":"We created ALSION for Gasoline and LPG Engines to restore friction units, protect them against wear and reduce vehicle operating costs. Our restorative, energy- and resource-saving technology works on loaded surfaces to reduce energy lost to friction, support smoother and quieter engine operation and lower thermal load.\n\nEngine oil carries ALSION to friction pairs. Through tribological treatment, we restore worn surfaces and form a protective layer for continued engine operation. Application delivers fuel savings up to 18%, increases service life and overhaul intervals up to four times and reduces overheating up to 60%. It also improves engine emission indicators: CO₂ −5%, CO −15% and CH −8%.\n\nWe supply a complete three-stage course containing three 10 g syringe tubes. Add the formulation through the oil filler without dismantling the engine. Complete all three stages as instructed. We can help check compatibility and calculate the quantity for your vehicle’s oil-system capacity.","summary":"Engine protection and restoration through the oil system. A complete three-stage treatment, with fuel savings up to 18%.","image":"https://www.hg-alsion.com/products/engine-petrol.jpg","available":true,"currency":"UAH","price":1560,"unit":"Kit · 3 syringes","variants":[],"instructions":"Treat a warm engine in three stages. Add the contents of one syringe through the oil filler, then idle for 10–15 minutes. Repeat after 100–150 km, and again after another 100–150 km. Treatment is complete after 1,000 km. Do not change the oil before completion.","documents":[{"type":"technical-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/TP-ALS-010-EN_ALSION_for_Gasoline_and_LPG_Engines_Official.pdf"},{"type":"safety-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/SDS-ALS-010-EN_ALSION_for_Gasoline_and_LPG_Engines_Official.pdf"}],"specifications":null,"effects":[{"title":"Savings on every kilometre","text":"Reducing mechanical losses lowers the energy spent overcoming friction. With ALSION, we reduce fuel consumption by up to 18%. Compare actual consumption before and after treatment on similar routes with consistent driving conditions."},{"title":"Restoration of working surfaces","text":"We restore mechanisms and assemblies with wear up to 90% to nominal parameters. ALSION acts on friction-pair surfaces. We assess assembly condition before treatment; cracks, broken components and leaks require repair."},{"title":"More service life between overhauls","text":"We increase treated-mechanism service life and overhaul intervals up to four times by restoring surfaces and protecting them against wear and corrosion. Continue scheduled engine maintenance."},{"title":"Smoother engine operation","text":"Lower friction is intended to reduce noise, vibration and thermal load and support smoother running. Record cold-start behaviour, idle and operating temperature before treatment for comparison."},{"title":"Emission indicators","text":"We improve engine emission indicators: CO₂ falls by 5%, CO by 15% and CH by 8%. Measure exhaust emissions before and after treatment to assess the change in your vehicle."}],"metrics":[{"value":"up to 18%","label":"Fuel savings","conditions":"We reduce fuel consumption by lowering mechanical losses."},{"value":"up to ×4","label":"Service life / overhaul interval","conditions":"We restore and protect mechanisms to extend their service life."},{"value":"up to 60%","label":"Reduction in overheating","conditions":"We reduce overheating in treated mechanisms."}],"applicationSteps":[{"title":"Prepare the engine","text":"Check engine-oil condition and level and warm the engine to operating temperature. Required product quantity depends on oil-system capacity."},{"title":"Stage 1","text":"Introduce the first syringe tube through the oil filler. Start the engine and allow it to idle for 10–15 minutes."},{"title":"Stages 2 and 3","text":"Apply stage two 100–150 km after stage one, then stage three after a further 100–150 km. Follow the same application procedure."}],"completion":"Treatment is considered complete after 1,000 km. Schedule the course so that a routine oil change is not due before completion. Check the oil level throughout.","effectConditions":"We recommend completing the full course as instructed. Results depend on assembly condition, wear and operating conditions. Saving percentages from different products cannot be added together.","effectSource":"https://www.hg-alsion.com/documents/additives/TP-ALS-010-EN_ALSION_for_Gasoline_and_LPG_Engines_Official.pdf","cases":[],"faq":[{"question":"Is this for the engine or the fuel tank?","answer":"This product is applied to the engine oil of a petrol or LPG engine. Fuel equipment uses a separate additive introduced into the tank."},{"question":"What does the price include?","answer":"A kit of three 10 g syringe tubes for a three-stage treatment. Dosage for a large oil system is confirmed separately."},{"question":"Can I run the engine without oil after treatment?","answer":"Oil and effective cooling remain essential. If oil pressure falls or the engine overheats, stop it according to the vehicle manufacturer’s instructions. We do not recommend using emergency resistance as a normal operating mode."},{"question":"Can savings from different additives be added together?","answer":"No. Each product targets a specific mechanism, while vehicle consumption depends on the whole system. For combined treatment, we recommend measuring the total consumption change under comparable conditions."}]},{"id":"0f46e90f-cb5c-c0c4-a6d8-fc1c7929e244","sku":"HG/AL 1103","name":"ALSION for diesel engines","category":"engine","language":"en","url":"https://www.hg-alsion.com/en/additives/engine-diesel","description":"We created ALSION for Diesel Engines to protect and restore friction pairs under everyday loads. Our restorative, energy- and resource-saving technology reduces mechanical losses, protects working surfaces against wear and corrosion and extends diesel-engine life. For a personal car, commercial vehicle or fleet, that means less energy spent overcoming friction and lower operating costs.\n\nEngine oil carries the formulation to loaded surface contacts. We restore worn surfaces and form a protective layer while reducing noise, vibration and thermal load. ALSION delivers fuel savings up to 18%, increases service life and overhaul intervals up to four times and reduces overheating up to 60%. Emission indicators also improve: CO₂ −5%, CO −15% and CH −8%.\n\nThe kit contains three 10 g syringe tubes for a complete three-stage course. Apply it through the oil filler without dismantling the engine. For a heavy-duty diesel or a non-standard oil-system capacity, we will calculate the required quantity individually and help you follow the treatment instructions.","summary":"Lower friction losses. More diesel-engine life. A complete three-stage treatment, with fuel savings up to 18%.","image":"https://www.hg-alsion.com/products/engine-diesel.jpg","available":true,"currency":"UAH","price":1560,"unit":"Kit · 3 syringes","variants":[],"instructions":"Treat a warm engine in three stages. Add the contents of one syringe through the oil filler, then idle for 10–15 minutes. Repeat after 100–150 km, and again after another 100–150 km. Treatment is complete after 1,000 km. Do not change the oil before completion.","documents":[{"type":"technical-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/TP-ALS-011-EN_ALSION_for_Diesel_Engines_Official.pdf"},{"type":"safety-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/SDS-ALS-011-EN_ALSION_for_Diesel_Engines_Official.pdf"}],"specifications":null,"effects":[{"title":"Savings on every kilometre","text":"Reducing mechanical losses lowers the energy spent overcoming friction. With ALSION, we reduce fuel consumption by up to 18%. Compare actual consumption before and after treatment on similar routes with consistent driving conditions."},{"title":"Restoration of working surfaces","text":"We restore mechanisms and assemblies with wear up to 90% to nominal parameters. ALSION acts on friction-pair surfaces. We assess assembly condition before treatment; cracks, broken components and leaks require repair."},{"title":"More service life between overhauls","text":"We increase treated-mechanism service life and overhaul intervals up to four times by restoring surfaces and protecting them against wear and corrosion. Continue scheduled engine maintenance."},{"title":"Smoother engine operation","text":"Lower friction is intended to reduce noise, vibration and thermal load and support smoother running. Record cold-start behaviour, idle and operating temperature before treatment for comparison."},{"title":"Emission indicators","text":"We improve engine emission indicators: CO₂ falls by 5%, CO by 15% and CH by 8%. Measure exhaust emissions before and after treatment to assess the change in your vehicle."}],"metrics":[{"value":"up to 18%","label":"Fuel savings","conditions":"We reduce fuel consumption by lowering mechanical losses."},{"value":"up to ×4","label":"Service life / overhaul interval","conditions":"We restore and protect mechanisms to extend their service life."},{"value":"up to 60%","label":"Reduction in overheating","conditions":"We reduce overheating in treated mechanisms."}],"applicationSteps":[{"title":"Prepare the engine","text":"Check engine-oil condition and level and warm the engine to operating temperature. Required product quantity depends on oil-system capacity."},{"title":"Stage 1","text":"Introduce the first syringe tube through the oil filler. Start the engine and allow it to idle for 10–15 minutes."},{"title":"Stages 2 and 3","text":"Apply stage two 100–150 km after stage one, then stage three after a further 100–150 km. Follow the same application procedure."}],"completion":"Treatment is considered complete after 1,000 km. Schedule the course so that a routine oil change is not due before completion. Check the oil level throughout.","effectConditions":"We recommend completing the full course as instructed. Results depend on assembly condition, wear and operating conditions. Saving percentages from different products cannot be added together.","effectSource":"https://www.hg-alsion.com/documents/additives/TP-ALS-011-EN_ALSION_for_Diesel_Engines_Official.pdf","cases":["https://www.hg-alsion.com/en/cases/volvo","https://www.hg-alsion.com/en/cases/velar","https://www.hg-alsion.com/en/cases/magnum"],"faq":[{"question":"Is this for the engine or the fuel tank?","answer":"This product is applied to the engine oil of a diesel engine. Fuel equipment uses a separate additive introduced into the tank."},{"question":"What does the price include?","answer":"A kit of three 10 g syringe tubes for a three-stage treatment. Dosage for a large oil system is confirmed separately."},{"question":"Can I run the engine without oil after treatment?","answer":"Oil and effective cooling remain essential. If oil pressure falls or the engine overheats, stop it according to the vehicle manufacturer’s instructions. We do not recommend using emergency resistance as a normal operating mode."},{"question":"Can savings from different additives be added together?","answer":"No. Each product targets a specific mechanism, while vehicle consumption depends on the whole system. For combined treatment, we recommend measuring the total consumption change under comparable conditions."}]},{"id":"f2a784e9-eefa-e3fa-8096-2041a857cdf5","sku":"HG/AL 1106","name":"ALSION for manual gearboxes & reducers","category":"transmission","language":"en","url":"https://www.hg-alsion.com/en/additives/transmission","description":"We created ALSION for Mechanical Transmissions to restore and protect gear and bearing surfaces, reduce friction and transmit energy with lower losses. Our product works in manual gearboxes, transfer cases, final drives and compatible reduction gears. Treatment reduces assembly noise and extends service life.\n\nTransmission oil carries ALSION to loaded friction pairs. Our technology forms a protective surface layer that compensates for wear and improves contact conditions. Application delivers fuel savings up to 8%, increases service life and overhaul intervals up to four times, reduces overheating up to 60% and significantly lowers noise and vibration.\n\nWe size the single-stage course separately for each assembly according to its oil capacity. For an EV reduction gear, we check its design and operating fluid. This product is not applied to conventional automatic/ATF transmissions or mechanisms with friction clutch packs. Tell us the assembly type and we can help check compatibility and calculate the required quantity.","summary":"Lower friction, noise and losses in manual gearboxes and reduction gears. One-stage treatment, with fuel savings up to 8%.","image":"https://www.hg-alsion.com/products/transmission.jpg","available":true,"currency":"UAH","price":550,"unit":"Tube","variants":[],"instructions":"Single-stage treatment: add the tube contents through the manual gearbox, transfer case or compatible reducer filler opening. Treatment completes after 1,500 km. Do not use in conventional automatic transmissions/ATF or friction clutch packs.","documents":[{"type":"technical-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/TP-ALS-012-EN_ALSION_for_Mechanical_Transmissions_Official.pdf"},{"type":"safety-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/SDS-ALS-012-EN_ALSION_for_Mechanical_Transmissions_Official.pdf"}],"specifications":null,"effects":[{"title":"Less energy lost to friction","text":"We reduce mechanical transmission losses and fuel consumption by up to 8%. For combined treatment, assess total vehicle consumption under comparable conditions; percentages for separate products cannot be added together."},{"title":"Restoration of working surfaces","text":"We restore mechanisms and assemblies with wear up to 90% to nominal parameters. ALSION acts on friction-pair surfaces. We assess assembly condition before treatment; cracks, broken components and leaks require repair."},{"title":"Quieter running with lower vibration","text":"We significantly reduce mechanical-transmission noise and vibration. Record initial noise and the load, speed and gear at which it appears to enable a useful comparison after treatment."},{"title":"Durability and thermal conditions","text":"We increase treated-mechanism service life up to four times and reduce overheating up to 60%. Oil level, seals and scheduled lubricant changes still require attention."}],"metrics":[{"value":"up to 8%","label":"Fuel savings","conditions":"We reduce energy losses in mechanical transmissions. Fuel savings apply to combustion-engine vehicles."},{"value":"up to ×4","label":"Service life / overhaul interval","conditions":"We restore and protect mechanisms to extend their service life."},{"value":"up to 60%","label":"Reduction in overheating","conditions":"We reduce overheating in treated mechanisms."}],"applicationSteps":[{"title":"Check the assembly type","text":"Confirm a manual gearbox or compatible reduction gear. Check oil capacity and product quantity for each assembly separately."},{"title":"Apply the formulation","text":"Introduce the tube contents through the appropriate gearbox, transfer-case or reduction-gear oil filler."},{"title":"Operate normally","text":"Treatment takes place during normal operation. Check for leaks and maintain the correct oil level."}],"completion":"Treatment completes after 1,500 km. For stationary equipment or a different operating pattern, contact us to confirm the course.","effectConditions":"We recommend completing the full course as instructed. Results depend on assembly condition, wear and operating conditions. Saving percentages from different products cannot be added together.","effectSource":"https://www.hg-alsion.com/documents/additives/TP-ALS-012-EN_ALSION_for_Mechanical_Transmissions_Official.pdf","cases":["https://www.hg-alsion.com/en/cases/leaf","https://www.hg-alsion.com/en/cases/magnum"],"faq":[{"question":"Can I use it in an automatic, CVT or DCT?","answer":"This product is not intended for conventional automatic/ATF transmissions or mechanisms with friction clutch packs. A CVT/DCT label alone does not establish compatibility; the exact assembly must be checked."},{"question":"Is it suitable for an EV?","answer":"It can be considered for a compatible reduction gear after checking design and lubricant. The Nissan Leaf case records one vehicle’s result and cannot automatically be generalised to all EVs."},{"question":"Can savings from different additives be added together?","answer":"No. Each product targets a specific mechanism, while vehicle consumption depends on the whole system. For combined treatment, we recommend measuring the total consumption change under comparable conditions."}]},{"id":"9df59778-9e25-da8a-3d37-b5a1d7587521","sku":"GENERATOR-PETROL","name":"ALSION for petrol & LPG generators","category":"generator","language":"en","url":"https://www.hg-alsion.com/en/additives/generator-petrol","description":"We created ALSION for Gasoline and LPG Generators to protect the engine, restore its friction pairs and reduce electricity-generation costs. When lighting, communications or your business depend on a generator, every litre of fuel and every hour of engine life matters. Our tribological technology reduces mechanical losses, noise, vibration and thermal load.\n\nEngine oil carries the formulation to working surfaces. ALSION restores worn friction pairs and forms a protective layer for continued operation. We deliver fuel savings up to 15–18%, increases in engine life up to five times, efficiency improvements up to 5% and engine-oil life up to twice as long. Harmful emissions fall by up to 15%.\n\nThe kit includes a complete three-stage course for oil systems from 0.5 to 3.5 litres. Apply it through the oil filler; treatment completes after 8–9 operating hours. We will calculate the quantity individually for larger generators. Follow the application instructions and the generator’s permitted operating load.","summary":"A complete treatment for a petrol or LPG generator with a 0.5–3.5 L oil system. Fuel savings up to 18%.","image":"https://www.hg-alsion.com/products/generator-petrol.png","available":true,"currency":"UAH","price":999,"unit":"Kit · 3 stages","variants":[],"instructions":"For a 0.5–3.5 L oil system. Treat in three stages: add one syringe to the warm engine oil filler, then idle for 10–15 minutes. Repeat after 1.8–2.5 operating hours, and again after another 1.8–2.5 hours. Treatment completes after 8–9 hours. Follow the generator manufacturer’s operating limits.","documents":[],"specifications":null,"effects":[{"title":"Lower fuel expenditure","text":"We reduce generator fuel consumption by up to 15–18%. Compare fuel use in L/h at the same electrical load before and after the course."},{"title":"Engine protection and restoration","text":"Treatment targets restoration of worn friction pairs and their protection in use. We increase generator-engine service life up to five times."},{"title":"Efficiency and lubricant life","text":"We improve generator efficiency by up to 5% and extend engine-oil life up to twice as long. Changes to oil-drain intervals require generator-manufacturer approval or lubricant-condition analysis."},{"title":"Quieter running and steadier temperature","text":"Reduced noise, vibration and thermal load aim to make operation more comfortable. We also reduce harmful emissions by up to 15%."}],"metrics":[{"value":"up to 18%","label":"Fuel savings","conditions":"We reduce generator fuel consumption by lowering friction losses."},{"value":"up to ×5","label":"Engine service life","conditions":"We restore and protect the generator engine’s friction pairs."},{"value":"8–9","label":"Hours to treatment completion","conditions":"A course with three successive application stages."}],"applicationSteps":[{"title":"Stage 1","text":"Warm the generator to operating temperature and introduce the first syringe tube through the oil filler. Allow 10–15 minutes of idle operation as permitted by the generator instructions."},{"title":"Stage 2","text":"After 1.8–2.5 operating hours, repeat the same procedure with the second syringe tube."},{"title":"Stage 3","text":"After a further 1.8–2.5 operating hours, repeat with the third syringe tube."}],"completion":"Treatment is considered complete after 8–9 operating hours. Monitor oil level and follow the generator’s permitted load and rest periods throughout.","effectConditions":"We recommend completing all three stages as instructed. Results depend on engine condition, load and adherence to the generator’s operating duty.","effectSource":"https://www.hg-alsion.com/instructions","cases":[],"faq":[{"question":"Is it suitable for an oil system larger than 3.5 L?","answer":"A larger generator requires an individual dosage calculation. Tell us the model, engine type and engine-oil capacity."},{"question":"Does the permitted continuous running time change?","answer":"Operating duty, load, ventilation and cooling remain as specified by the generator manufacturer. Assess treatment effects within those conditions."}]},{"id":"385765f3-88a8-b642-2cdf-c0941743b44c","sku":"HG/AL 1104","name":"ALSION for diesel fuel systems","category":"fuel","language":"en","url":"https://www.hg-alsion.com/en/additives/fuel-diesel","description":"We created ALSION for Diesel Engine Fuel Equipment to restore worn friction pairs and protect them against further wear and corrosion. Our technology reduces internal losses and extends fuel-system life in passenger cars and commercial vehicles. Treatment takes one application through the fuel tank.\n\nDiesel fuel carries the formulation to the working surfaces of the relevant mechanisms. ALSION restores those surfaces, reduces noise, vibration and overheating and provides continued protection in operation. We help reduce operating costs with fuel savings up to 5% and increases in treated-mechanism service life and overhaul intervals up to four times.\n\nThe pack contains one 10 g syringe tube for a single-stage course followed by refuelling with 40–50 litres of diesel. For a combined vehicle treatment, we also offer a separate ALSION for Diesel Engines, applied through the engine oil. We can help select the right products and calculate the required quantity for your equipment.","summary":"A single-stage tribological treatment for diesel fuel equipment. Fuel savings up to 5%.","image":"https://www.hg-alsion.com/products/fuel-diesel.jpg","available":true,"currency":"UAH","price":650,"unit":"Tube","variants":[],"instructions":"Single-stage treatment: add the tube contents to a fuel tank containing minimal fuel, then fill with 40–50 litres of the matching fuel. Operate normally. Treatment completes after 100–150 hours of fuel system operation.","documents":[{"type":"technical-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/TP-ALS-015-EN_ALSION_for_Diesel_Engine_Fuel_Equipment_Official.pdf"},{"type":"safety-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/SDS-ALS-015-EN_ALSION_for_Diesel_Engine_Fuel_Equipment_Official.pdf"}],"specifications":null,"effects":[{"title":"Lower losses in the fuel system","text":"With ALSION, we reduce fuel consumption by up to 5% by lowering losses in fuel equipment. Assess results using actual refuelling records or controlled measurements, allowing for route and load."},{"title":"Restoration of working surfaces","text":"We restore mechanisms and assemblies with wear up to 90% to nominal parameters. ALSION acts on friction-pair surfaces. We assess assembly condition before treatment; cracks, broken components and leaks require repair."},{"title":"Protection for precision mechanisms","text":"Protection against wear, corrosion and oxidation helps preserve working surfaces. We extend treated-mechanism service life and overhaul intervals up to four times."},{"title":"More stable, quieter operation","text":"We reduce noise, vibration and overheating in fuel-equipment mechanisms. Diagnose system faults, leaks or incorrect pressure before treatment."}],"metrics":[{"value":"up to 5%","label":"Fuel savings","conditions":"We reduce internal losses in fuel equipment."},{"value":"up to ×4","label":"Service life / overhaul interval","conditions":"We restore and protect mechanisms to extend their service life."},{"value":"1","label":"Application stage","conditions":"Into the tank followed by 40–50 L of fuel."}],"applicationSteps":[{"title":"Introduce into the tank","text":"Add the tube contents to the fuel tank containing a minimal amount of diesel fuel."},{"title":"Refuel with 40–50 litres","text":"Refuel with 40–50 L of diesel fuel and operate the vehicle normally."},{"title":"Allow the course to complete","text":"Treatment progresses during normal fuel-equipment operation. This course does not require adding another tube at each refuelling."}],"completion":"Treatment is considered complete after 100–150 hours of fuel-system operation. These are operating hours, not 100–150 kilometres.","effectConditions":"We recommend completing the full course as instructed. Results depend on assembly condition, wear and operating conditions. Saving percentages from different products cannot be added together.","effectSource":"https://www.hg-alsion.com/documents/additives/TP-ALS-015-EN_ALSION_for_Diesel_Engine_Fuel_Equipment_Official.pdf","cases":["https://www.hg-alsion.com/en/cases/volvo","https://www.hg-alsion.com/en/cases/velar","https://www.hg-alsion.com/en/cases/magnum"],"faq":[{"question":"Should I add this to the engine oil?","answer":"Apply this product through the fuel tank as instructed. Engine oil treatment requires a separate ALSION product."},{"question":"When should I assess the result?","answer":"Record baseline values before starting, observe operation during the course and compare after the specified 100–150 operating hours."},{"question":"Can savings from different additives be added together?","answer":"No. Each product targets a specific mechanism, while vehicle consumption depends on the whole system. For combined treatment, we recommend measuring the total consumption change under comparable conditions."}]},{"id":"b3848891-c7c8-be5a-5e41-2d769ca4cea4","sku":"HG/AL 1102","name":"ALSION for petrol fuel systems","category":"fuel","language":"en","url":"https://www.hg-alsion.com/en/additives/fuel-petrol","description":"We created ALSION for Gasoline Engine Fuel Equipment to restore its friction pairs and protect precision mechanisms against wear and corrosion. Our technology works on fuel-system surfaces to reduce energy losses and maintain stable equipment operation. One application through the fuel tank provides the tribological treatment.\n\nFuel carries the formulation to the relevant mechanisms. ALSION restores worn surfaces, protects them during continued operation and reduces mechanism noise, vibration and overheating. We help lower operating costs through fuel savings up to 5% and increases in treated-mechanism service life and overhaul intervals up to four times.\n\nOne 10 g syringe tube provides a single-stage course, followed by refuelling with 40–50 litres of petrol. On a vehicle running on LPG, apply it specifically to the petrol tank. To treat the engine as well, we can recommend our separate oil-applied ALSION product. Each of our formulations works in its intended system according to its own application instructions.","summary":"A single-stage tribological treatment for petrol fuel equipment. Fuel savings up to 5%.","image":"https://www.hg-alsion.com/products/fuel-petrol.jpg","available":true,"currency":"UAH","price":600,"unit":"Tube","variants":[],"instructions":"Single-stage treatment: add the tube contents to a fuel tank containing minimal fuel, then fill with 40–50 litres of the matching fuel. Operate normally. Treatment completes after 100–150 hours of fuel system operation.","documents":[{"type":"technical-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/TP-ALS-014-EN_ALSION_for_Gasoline_Engine_Fuel_Equipment_Official.pdf"},{"type":"safety-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/SDS-ALS-014-EN_ALSION_for_Gasoline_Engine_Fuel_Equipment_Official.pdf"}],"specifications":null,"effects":[{"title":"Lower losses in the fuel system","text":"With ALSION, we reduce fuel consumption by up to 5% by lowering losses in fuel equipment. Assess results using actual refuelling records or controlled measurements, allowing for route and load."},{"title":"Restoration of working surfaces","text":"We restore mechanisms and assemblies with wear up to 90% to nominal parameters. ALSION acts on friction-pair surfaces. We assess assembly condition before treatment; cracks, broken components and leaks require repair."},{"title":"Protection for precision mechanisms","text":"Protection against wear, corrosion and oxidation helps preserve working surfaces. We extend treated-mechanism service life and overhaul intervals up to four times."},{"title":"More stable, quieter operation","text":"We reduce noise, vibration and overheating in fuel-equipment mechanisms. Diagnose system faults, leaks or incorrect pressure before treatment."}],"metrics":[{"value":"up to 5%","label":"Fuel savings","conditions":"We reduce internal losses in fuel equipment."},{"value":"up to ×4","label":"Service life / overhaul interval","conditions":"We restore and protect mechanisms to extend their service life."},{"value":"1","label":"Application stage","conditions":"Into the tank followed by 40–50 L of fuel."}],"applicationSteps":[{"title":"Introduce into the tank","text":"Add the tube contents to the fuel tank containing a minimal amount of petrol."},{"title":"Refuel with 40–50 litres","text":"Refuel with 40–50 L of petrol and operate the vehicle normally."},{"title":"Allow the course to complete","text":"Treatment progresses during normal fuel-equipment operation. This course does not require adding another tube at each refuelling."}],"completion":"Treatment is considered complete after 100–150 hours of fuel-system operation. These are operating hours, not 100–150 kilometres.","effectConditions":"We recommend completing the full course as instructed. Results depend on assembly condition, wear and operating conditions. Saving percentages from different products cannot be added together.","effectSource":"https://www.hg-alsion.com/documents/additives/TP-ALS-014-EN_ALSION_for_Gasoline_Engine_Fuel_Equipment_Official.pdf","cases":[],"faq":[{"question":"Should I add this to the engine oil?","answer":"Apply this product through the fuel tank as instructed. Engine oil treatment requires a separate ALSION product."},{"question":"When should I assess the result?","answer":"Record baseline values before starting, observe operation during the course and compare after the specified 100–150 operating hours."},{"question":"Can savings from different additives be added together?","answer":"No. Each product targets a specific mechanism, while vehicle consumption depends on the whole system. For combined treatment, we recommend measuring the total consumption change under comparable conditions."}]},{"id":"298204ae-0fd1-77cc-8827-edf970c5515d","sku":"GENERATOR-DIESEL","name":"ALSION for diesel generators","category":"generator","language":"en","url":"https://www.hg-alsion.com/en/additives/generator-diesel","description":"We created ALSION for Diesel Generators to protect the engine, restore its friction pairs and reduce electricity-generation costs. When lighting, communications or your business depend on a generator, every litre of fuel and every hour of engine life matters. Our tribological technology reduces mechanical losses, noise, vibration and thermal load.\n\nEngine oil carries the formulation to working surfaces. ALSION restores worn friction pairs and forms a protective layer for continued operation. We deliver fuel savings up to 15–18%, increases in engine life up to five times, efficiency improvements up to 5% and engine-oil life up to twice as long. Harmful emissions fall by up to 15%.\n\nThe kit includes a complete three-stage course for oil systems from 0.5 to 3.5 litres. Apply it through the oil filler; treatment completes after 8–9 operating hours. We will calculate the quantity individually for larger generators. Follow the application instructions and the generator’s permitted operating load.","summary":"A complete treatment for a diesel generator with a 0.5–3.5 L oil system. Fuel savings up to 18%.","image":"https://www.hg-alsion.com/products/generator-diesel.png","available":true,"currency":"UAH","price":999,"unit":"Kit · 3 stages","variants":[],"instructions":"For a 0.5–3.5 L oil system. Treat in three stages: add one syringe to the warm engine oil filler, then idle for 10–15 minutes. Repeat after 1.8–2.5 operating hours, and again after another 1.8–2.5 hours. Treatment completes after 8–9 hours. Follow the generator manufacturer’s operating limits.","documents":[],"specifications":null,"effects":[{"title":"Lower fuel expenditure","text":"We reduce generator fuel consumption by up to 15–18%. Compare fuel use in L/h at the same electrical load before and after the course."},{"title":"Engine protection and restoration","text":"Treatment targets restoration of worn friction pairs and their protection in use. We increase generator-engine service life up to five times."},{"title":"Efficiency and lubricant life","text":"We improve generator efficiency by up to 5% and extend engine-oil life up to twice as long. Changes to oil-drain intervals require generator-manufacturer approval or lubricant-condition analysis."},{"title":"Quieter running and steadier temperature","text":"Reduced noise, vibration and thermal load aim to make operation more comfortable. We also reduce harmful emissions by up to 15%."}],"metrics":[{"value":"up to 18%","label":"Fuel savings","conditions":"We reduce generator fuel consumption by lowering friction losses."},{"value":"up to ×5","label":"Engine service life","conditions":"We restore and protect the generator engine’s friction pairs."},{"value":"8–9","label":"Hours to treatment completion","conditions":"A course with three successive application stages."}],"applicationSteps":[{"title":"Stage 1","text":"Warm the generator to operating temperature and introduce the first syringe tube through the oil filler. Allow 10–15 minutes of idle operation as permitted by the generator instructions."},{"title":"Stage 2","text":"After 1.8–2.5 operating hours, repeat the same procedure with the second syringe tube."},{"title":"Stage 3","text":"After a further 1.8–2.5 operating hours, repeat with the third syringe tube."}],"completion":"Treatment is considered complete after 8–9 operating hours. Monitor oil level and follow the generator’s permitted load and rest periods throughout.","effectConditions":"We recommend completing all three stages as instructed. Results depend on engine condition, load and adherence to the generator’s operating duty.","effectSource":"https://www.hg-alsion.com/instructions","cases":[],"faq":[{"question":"Is it suitable for an oil system larger than 3.5 L?","answer":"A larger generator requires an individual dosage calculation. Tell us the model, engine type and engine-oil capacity."},{"question":"Does the permitted continuous running time change?","answer":"Operating duty, load, ventilation and cooling remain as specified by the generator manufacturer. Assess treatment effects within those conditions."}]},{"id":"9140156a-4347-040d-285c-ef15c0adb310","sku":"HG/AL 1105","name":"ALSION for hydraulics & power steering","category":"hydraulic","language":"en","url":"https://www.hg-alsion.com/en/additives/hydraulic","description":"We created ALSION for Hydraulic Systems to restore friction pairs, protect them against wear and corrosion and extend mechanism life. In hydraulic power steering and compatible industrial hydraulics, our product reduces internal losses and helps restore smooth, stable operation.\n\nThe working fluid carries the formulation to loaded surfaces. Our tribological technology restores those surfaces and forms a protective layer for continued service. ALSION increases treated-mechanism service life and overhaul intervals up to four times, reduces overheating up to 60% and significantly lowers noise and vibration. It protects an assembly that operates under pressure every day.\n\nWe offer a single-stage course. Before treating hydraulic power steering, replace the fluid with fresh fluid of the correct specification and follow the application instructions. For other hydraulic systems, we can calculate the quantity according to system type and capacity. The product is intended for hydraulic circuits; electric steering without such a circuit does not require this application.","summary":"Restoration and protection of hydraulic and power-steering friction pairs. Single-stage treatment after changing the power-steering fluid.","image":"https://www.hg-alsion.com/products/hydraulic.jpg","available":true,"currency":"UAH","price":620,"unit":"Tube","variants":[],"instructions":"Replace the power steering fluid first. Add the tube contents to the warm hydraulic or power steering reservoir. Follow the product instructions. Treatment completes after 1,500 km.","documents":[{"type":"technical-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/TP-ALS-013-EN_ALSION_for_Hydraulic_Systems_Official.pdf"},{"type":"safety-data-sheet","language":"en","url":"https://www.hg-alsion.com/documents/additives/SDS-ALS-013-EN_ALSION_for_Hydraulic_Systems_Official.pdf"}],"specifications":null,"effects":[{"title":"Restoration of working surfaces","text":"We restore mechanisms and assemblies with wear up to 90% to nominal parameters. ALSION acts on friction-pair surfaces. We assess assembly condition before treatment; cracks, broken components and leaks require repair."},{"title":"Smoother, quieter operation","text":"We significantly reduce noise and vibration in hydraulic mechanisms. Compare warmed-up power-steering operation under the same steering conditions."},{"title":"More stable thermal operation","text":"We reduce overheating in treated mechanisms by up to 60%. Correct fluid, level and a sound hydraulic circuit provide the necessary operating conditions."},{"title":"Longer mechanism life","text":"We increase service life and overhaul intervals up to four times by restoring working surfaces and protecting them against wear and corrosion. This helps keep the hydraulic system in service longer."}],"metrics":[{"value":"up to ×4","label":"Service life / overhaul interval","conditions":"We restore and protect mechanisms to extend their service life."},{"value":"up to 60%","label":"Reduction in overheating","conditions":"We reduce overheating in treated mechanisms."},{"value":"1","label":"Application stage","conditions":"Into the relevant hydraulic-system reservoir."}],"applicationSteps":[{"title":"Change the power-steering fluid","text":"Before treatment, change to fresh fluid of the correct specification. Check the level and system integrity."},{"title":"Apply to the warmed system","text":"Add the tube contents to the hydraulic or power-steering reservoir at operating temperature. Allow the system to run for five minutes."},{"title":"Circulate the fluid","text":"With the engine running, turn the steering smoothly in both directions for 5–10 minutes without holding it against the end stops. Then operate normally."}],"completion":"For vehicle power steering, treatment is considered complete after 1,500 km. Confirm industrial hydraulic treatment and dosage according to system type and capacity.","effectConditions":"We recommend completing the full course as instructed. Results depend on assembly condition, wear and operating conditions. Saving percentages from different products cannot be added together.","effectSource":"https://www.hg-alsion.com/documents/additives/TP-ALS-013-EN_ALSION_for_Hydraulic_Systems_Official.pdf","cases":[],"faq":[{"question":"Is it needed for electric power steering?","answer":"If there is no hydraulic circuit or reservoir, this application is not applicable. Check the vehicle design if the steering type is unknown."},{"question":"Does ALSION seal leaks?","answer":"The formulation targets friction pairs. Leaking hoses, seals and damaged components require the fault to be repaired."}]},{"id":"oil-tsp-mv-10w40","sku":"TSP-MV 10W40","name":"TRIBOCORE TSP-MV 10W40","category":"oil","language":"en","url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-mv-10w-40","description":"HG-ALSION TRIBOCORE TSP-MV 10W40 is an all-season lubricant based on ALSION nanostructured tribological technology. TSP means Tribological Surface Protection: the technology forms a protective tribological layer in loaded friction pairs.\n\nThe formula is designed to protect working surfaces against wear, reduce friction and mechanical losses, maintain stable operation and support the resources of the mechanism. Thermal and oxidation stability help preserve the lubricant’s protective properties in demanding conditions.\n\nChoose the viscosity and performance specification required by the equipment manufacturer. The product technical data sheet provides detailed characteristics and application information. Follow the manufacturer’s service interval. Stock is confirmed before dispatch.","summary":"SAE 10W-40 · based on ALSION tribological technology","image":"https://www.hg-alsion.com/products/tribocore/tsp-mv-10w40-4l.jpg","available":true,"currency":"UAH","price":795,"unit":"1 L","variants":[{"label":"1 л","price":795,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-mv-10w-40?variant=0"},{"label":"4 л","price":2655,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-mv-10w-40?variant=1"}],"instructions":"Follow the equipment manufacturer’s requirements and the product technical data sheet. Follow the specified service interval.","documents":[{"type":"technical-data-sheet","language":"uk","url":"https://www.hg-alsion.com/documents/TSP-MV_10W40.pdf"}],"specifications":{"mechanism":"engine","sae":"10W40","statedSpecifications":["API SP","ACEA A3","ACEA B4","MB 229.3","MB 229.1","MB 226.5","VW 501 01","VW 505 00","Renault RN0710","Renault RN0700","Fiat 9.55535-G2","Fiat 9.55535-D2","PSA B71 2300"],"formalApprovals":[],"synthetic":false}},{"id":"oil-tsp-hd-10w40","sku":"TSP-HD 10W40","name":"TRIBOCORE TSP-HD 10W40","category":"oil","language":"en","url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-hd-10w-40","description":"HG-ALSION TRIBOCORE TSP-HD 10W40 is an all-season lubricant based on ALSION nanostructured tribological technology. TSP means Tribological Surface Protection: the technology forms a protective tribological layer in loaded friction pairs.\n\nThe formula is designed to protect working surfaces against wear, reduce friction and mechanical losses, maintain stable operation and support the resources of the mechanism. Thermal and oxidation stability help preserve the lubricant’s protective properties in demanding conditions.\n\nChoose the viscosity and performance specification required by the equipment manufacturer. The product technical data sheet provides detailed characteristics and application information. Follow the manufacturer’s service interval. Stock is confirmed before dispatch.","summary":"SAE 10W-40 · based on ALSION tribological technology","image":"https://www.hg-alsion.com/products/tribocore/tsp-hd-10w40-4l.jpg","available":true,"currency":"UAH","price":2735,"unit":"4 L","variants":[{"label":"4 л","price":2735,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-hd-10w-40?variant=0"},{"label":"20 л","price":12000,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-hd-10w-40?variant=1"}],"instructions":"Follow the equipment manufacturer’s requirements and the product technical data sheet. Follow the specified service interval.","documents":[{"type":"technical-data-sheet","language":"uk","url":"https://www.hg-alsion.com/documents/TSP-HD_10W40.pdf"}],"specifications":{"mechanism":"engine","sae":"10W40","statedSpecifications":["API CI-4 PLUS","API CF","API SL","ACEA E7","ACEA A3","ACEA B4","MB 228.3","MB 229.1","MAN M 3275-1","Volvo VDS-3","Renault RLD"],"formalApprovals":[],"synthetic":false}},{"id":"oil-tsp-c3-05w40","sku":"TSP-C3 05W40","name":"TRIBOCORE TSP-C3 05W40","category":"oil","language":"en","url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-c3-5w-40","description":"HG-ALSION TRIBOCORE TSP-C3 05W40 is an all-season lubricant based on ALSION nanostructured tribological technology. TSP means Tribological Surface Protection: the technology forms a protective tribological layer in loaded friction pairs.\n\nThe formula is designed to protect working surfaces against wear, reduce friction and mechanical losses, maintain stable operation and support the resources of the mechanism. Thermal and oxidation stability help preserve the lubricant’s protective properties in demanding conditions.\n\nChoose the viscosity and performance specification required by the equipment manufacturer. The product technical data sheet provides detailed characteristics and application information. Follow the manufacturer’s service interval. Stock is confirmed before dispatch.","summary":"SAE 5W-40 · based on ALSION tribological technology","image":"https://www.hg-alsion.com/products/tribocore/tsp-c3-05w40-4l.jpg","available":true,"currency":"UAH","price":835,"unit":"1 L","variants":[{"label":"1 л","price":835,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-c3-5w-40?variant=0"},{"label":"4 л","price":2787,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-c3-5w-40?variant=1"}],"instructions":"Follow the equipment manufacturer’s requirements and the product technical data sheet. Follow the specified service interval.","documents":[{"type":"technical-data-sheet","language":"uk","url":"https://www.hg-alsion.com/documents/TSP-C3_05W40.pdf"}],"specifications":{"mechanism":"engine","sae":"5W40","statedSpecifications":["API SP","ACEA C3","BMW Longlife-04","Ford WSS-M2C917-A","MB 229.31","MB 229.51","MB 229.52","VW 505 00","VW 505 01","GM dexos2","Fiat 9.55535-S2","Fiat 9.55535-D3","Fiat 9.55535-GH2","Porsche A40","Porsche C40","Chrysler MS-10902","Renault RN0700","Renault RN0710"],"formalApprovals":[],"synthetic":true}},{"id":"oil-tsp-hd-05w40","sku":"TSP-HD 05W40","name":"TRIBOCORE TSP-HD 05W40","category":"oil","language":"en","url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-hd-5w-40","description":"HG-ALSION TRIBOCORE TSP-HD 05W40 is an all-season lubricant based on ALSION nanostructured tribological technology. TSP means Tribological Surface Protection: the technology forms a protective tribological layer in loaded friction pairs.\n\nThe formula is designed to protect working surfaces against wear, reduce friction and mechanical losses, maintain stable operation and support the resources of the mechanism. Thermal and oxidation stability help preserve the lubricant’s protective properties in demanding conditions.\n\nChoose the viscosity and performance specification required by the equipment manufacturer. The product technical data sheet provides detailed characteristics and application information. Follow the manufacturer’s service interval. Stock is confirmed before dispatch.","summary":"SAE 5W-40 · based on ALSION tribological technology","image":"https://www.hg-alsion.com/products/tribocore/tsp-hd-05w40-4l.jpg","available":true,"currency":"UAH","price":3090,"unit":"4 L","variants":[{"label":"4 л","price":3090,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-hd-5w-40?variant=0"},{"label":"20 л","price":13700,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-hd-5w-40?variant=1"}],"instructions":"Follow the equipment manufacturer’s requirements and the product technical data sheet. Follow the specified service interval.","documents":[{"type":"technical-data-sheet","language":"uk","url":"https://www.hg-alsion.com/documents/TSP-HD_05W40.pdf"}],"specifications":{"mechanism":"engine","sae":"5W40","statedSpecifications":["API CI-4 PLUS","API CF","API SL","ACEA E7","ACEA E5","ACEA E3","MB 228.3","MAN M 3275-1","Volvo VDS-3","Renault RLD","Renault RLD-2"],"formalApprovals":[],"synthetic":true}},{"id":"oil-tsp-mv-c3-05w30","sku":"TSP-MV-C3 05W30","name":"TRIBOCORE TSP-MV-C3 05W30","category":"oil","language":"en","url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-mv-c3-5w-30","description":"HG-ALSION TRIBOCORE TSP-MV-C3 05W30 is an all-season lubricant based on ALSION nanostructured tribological technology. TSP means Tribological Surface Protection: the technology forms a protective tribological layer in loaded friction pairs.\n\nThe formula is designed to protect working surfaces against wear, reduce friction and mechanical losses, maintain stable operation and support the resources of the mechanism. Thermal and oxidation stability help preserve the lubricant’s protective properties in demanding conditions.\n\nChoose the viscosity and performance specification required by the equipment manufacturer. The product technical data sheet provides detailed characteristics and application information. Follow the manufacturer’s service interval. Stock is confirmed before dispatch.","summary":"SAE 5W-30 · based on ALSION tribological technology","image":"https://www.hg-alsion.com/products/tribocore/tsp-mv-c3-05w30-4l.jpg","available":true,"currency":"UAH","price":903,"unit":"1 L","variants":[{"label":"1 л","price":903,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-mv-c3-5w-30?variant=0"},{"label":"4 л","price":3034,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-mv-c3-5w-30?variant=1"}],"instructions":"Follow the equipment manufacturer’s requirements and the product technical data sheet. Follow the specified service interval.","documents":[{"type":"technical-data-sheet","language":"uk","url":"https://www.hg-alsion.com/documents/TSP-MV-C3_05W30.pdf"}],"specifications":{"mechanism":"engine","sae":"5W30","statedSpecifications":["API SP","API SN PLUS","ACEA C2","ACEA C3","MB 229.31","MB 229.51","MB 229.52","Opel OV0401547-D30","VW 505 00","VW 505 01","BMW Longlife-04","Ford WSS-M2C917-A","GM LL-A-025","GM LL-B-025","GM dexos2","Fiat 9.55535-S1","PSA B71 2290","PSA B71 2288"],"formalApprovals":[],"synthetic":true}},{"id":"oil-tsp-c4-05w30","sku":"TSP-C4 05W30","name":"TRIBOCORE TSP-C4 05W30","category":"oil","language":"en","url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-c4-5w-30","description":"HG-ALSION TRIBOCORE TSP-C4 05W30 is an all-season lubricant based on ALSION nanostructured tribological technology. TSP means Tribological Surface Protection: the technology forms a protective tribological layer in loaded friction pairs.\n\nThe formula is designed to protect working surfaces against wear, reduce friction and mechanical losses, maintain stable operation and support the resources of the mechanism. Thermal and oxidation stability help preserve the lubricant’s protective properties in demanding conditions.\n\nChoose the viscosity and performance specification required by the equipment manufacturer. The product technical data sheet provides detailed characteristics and application information. Follow the manufacturer’s service interval. Stock is confirmed before dispatch.","summary":"SAE 5W-30 · based on ALSION tribological technology","image":"https://www.hg-alsion.com/products/tribocore/tsp-c4-05w30-4l.jpg","available":true,"currency":"UAH","price":929,"unit":"1 L","variants":[{"label":"1 л","price":929,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-c4-5w-30?variant=0"},{"label":"4 л","price":3069,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-c4-5w-30?variant=1"}],"instructions":"Follow the equipment manufacturer’s requirements and the product technical data sheet. Follow the specified service interval.","documents":[{"type":"technical-data-sheet","language":"uk","url":"https://www.hg-alsion.com/documents/TSP-C4_05W30.pdf"}],"specifications":{"mechanism":"engine","sae":"5W30","statedSpecifications":["ACEA C4","Renault RN0720","MB 226.51","Fiat 9.55535-S4"],"formalApprovals":[],"synthetic":true}},{"id":"oil-tsp-g-75w90","sku":"TSP-G 75W90","name":"TRIBOCORE TSP-G 75W90","category":"oil","language":"en","url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-g-75w-90","description":"HG-ALSION TRIBOCORE TSP-G 75W90 is an all-season lubricant based on ALSION nanostructured tribological technology. TSP means Tribological Surface Protection: the technology forms a protective tribological layer in loaded friction pairs.\n\nThe formula is designed to protect working surfaces against wear, reduce friction and mechanical losses, maintain stable operation and support the resources of the mechanism. Thermal and oxidation stability help preserve the lubricant’s protective properties in demanding conditions.\n\nChoose the viscosity and performance specification required by the equipment manufacturer. The product technical data sheet provides detailed characteristics and application information. Follow the manufacturer’s service interval. Stock is confirmed before dispatch.","summary":"SAE 75W-90 · based on ALSION tribological technology","image":"https://www.hg-alsion.com/products/tribocore/tsp-g-75w90-1l.jpg","available":true,"currency":"UAH","price":920,"unit":"1 L","variants":[{"label":"1 л","price":920,"url":"https://www.hg-alsion.com/en/oils/tribocore-tsp-g-75w-90?variant=0"}],"instructions":"Follow the equipment manufacturer’s requirements and the product technical data sheet. Follow the specified service interval.","documents":[{"type":"technical-data-sheet","language":"uk","url":"https://www.hg-alsion.com/documents/TSP-G_75W90.pdf"}],"specifications":{"mechanism":"gear","sae":"75W90","statedSpecifications":["API GL-4","API GL-5","MIL-L-2105 D","VW 501 50","VW G 005 000","VW G 050 145","VW G 050 150","MB 235.7","Volvo 97310","Volvo 97316","ZF TE-ML 07A","ZF TE-ML 08"],"formalApprovals":[],"synthetic":false}}]}